HP Matrix Operating Environment Software User Manual
Page 112
1.
Unmanage the logical server using Delete
→Unmanage Logical Server...
2.
In VMware vCenter, migrate the virtual machine, selecting the option to change the data
store
3.
In HP SIM, re-identify the VM Host where the virtual machine is now located
4.
Refresh server resource information (selecting Insight Control virtual machine management
and HP SIM) using Tools
→Logical Servers→Refresh...
5.
Import the virtual machine as a logical server using Tools
→Logical Servers→Import...
VM Host does not appear on move logical server target screen
If a VM Host does not appear on the Move: Assign Logical Servers to Target Hosts screen
in the Available Target Hosts and Rejected Target Hosts tables, or if a virtual machine fails
to be imported with a "cannot find VM" or "cannot find VM Host" message, check for the following
possible causes.
Possible Causes
•
The UUID is null or missing.
•
The VM Hosts do not have the proper licenses installed.
•
The target VM Host is not discovered during the host Discovery phase.
•
Integrity VM targets: The private network between the source and target servers does not
have SSH set up properly.
•
Integrity VM targets: The target VM Host does not have the Integrity VM 4.2.5 VirtProvider
patch kit installed.
Suggested actions
•
Check to see that the VM Host is properly configured and has a UUID. To perform this
check, view the HP SIM system page for the VM Host and look for the UUID field.
Perform the following steps if vselog.lsm.log contains the error:
2010-03-05 12:58:41,675 [pool-8-thread-9] WARN app - (LSM) Populate VM Host
(15.2.9.3) failed with exception: LSM_ADPT_VMM_ERR_NO_VM_HOST_UUID
1.
Identify the system using Systems Insight Manager.
2.
Check the VM Host status in Systems Insight Manager.
3.
Unregister the host, then register it again.
4.
When the VM status is green, refresh Insight Control virtual machine management
(VMM) resources using the Tools
→Logical Servers→Refresh... menu selection.
For more information, see the HP Insight Control virtual machine management
documentation at
•
Run the Insight managed system setup wizard to verify that the licenses are properly installed
on all of the managed servers.
•
Verify the credential settings are properly configured on the VM Host and rerun the host
Discovery process.
•
Integrity VM targets: To enable secure communication between the source and target hosts,
generate SSH keys on both systems. You need root privileges to generate and set up the SSH
keys required for guest migration. Use the secsetup script provided by Integrity VM.
Execute the following command on both the source and target hosts:
# /opt/hpvm/bin/secsetup -r otherhost
See HP Integrity Virtual Machines 4.2: Installation, Configuration, and Administration at
for more information.
•
Integrity VM targets: Install LVM B.11.31.1010 on the VM Host. To locate LVM on the
software depot website, go to
and search for the keyword LVM.
112
Troubleshooting