HP Matrix Operating Environment Software - Manual (Page 68)

You can view or modify the target attributes of a logical server by first selecting the logical server
in the Physical and Virtual perspective, then using the Modify
→Logical Server Target
Attributes
→Manage... menu selection.
Figure 5-5 Modify target attributes menu
Types of target systems can be added to or removed from the logical server’s target attributes.
Selecting a server from the Target Attributes Available to Add table adds that type of server with
its associated resources to the list of most suitable targets for the logical server. Selecting a type
of server from the Target Attributes Available to Remove table causes the specified type of server
to no longer be considered most suitable.
Figure 5-6 Manage target attributes screen
Defining storage
You create a storage pool entry or a storage entry associated with a cross-technology logical
server in the same way as you do for physical to physical or virtual to virtual logical servers,
using Modify
→Logical Server Storage Pools… or Create→Logical Server….
On the Create
→Logical Server… storage screen, select a storage type of SAN Storage Entry
for both servers with Virtual Connect logical servers and virtual machine logical servers.
68 Managing fluid cross-technology logical servers