AltiGen comm ACM 5.1 - Manual (Page 401)

Chapter 29: Tools and Applications
AltiWare ACM 5.1 Administration Manual 387
C
H A P T E R
29
Tools and Applications
AltiWare comes with the following tools and applications for testing, diagnosing and
configuring your system. They are available from the Windows Start menu: Start > All
Programs > AltiWare ACC/ACM:
Under Gateway Tools:
•
AltiGen Board Test
•
CT-Bus Test Tool (formerly MVIP Test Tool)
•
Gateway Configuration Tool (For information on this tool, see “AltiGateway
Configuration Tool” on page 84.)
Under Utilities:
• ACC/ACM Backup and Restore Utility
• AltiWare Admin and Extension Security Checker
• Start and Stop All AltiGen Services
• Trace Collector
•
Voice File Converter
•
Read Config
In addition, the Work/Hunt Group Converter utility is available from AltiWare ACC/ACM
Administrator: Services > Work/Hunt Group Converter.
AltiGen Board Test
This is an AltiGen hardware test tool for system hang and other hardware-related
problems. It tests the following on all AltiGen boards except Quantum boards:
• Board memory from host or from both host and DSP
• DSP internal memory from host or from both host and DSP
• FMIC connection and data memory from host
• NVRAM from host
• PMC chip from host and DSP if T1/E1 board
You have the option of testing a single board or testing all boards at the same time.