HP ProLiant DL320e Gen8 Server - Manual (Page 55)

•
SNMP Port —The industry-standard (default) SNMP port is 161 for SNMP access. If you
customize the SNMP Port value, some SNMP clients might not work correctly with iLO unless
those clients support the use of a nonstandard SNMP port.
•
SNMP Port Trap—The industry-standard (default) SNMP trap port is 162 for SNMP alerts (or
traps). If you customize the SNMP Trap Port value, some SNMP monitoring applications (such
as HP SIM) might not work correctly with iLO unless those applications support the use of a
nonstandard SNMP trap port.
To edit access settings on the Service tab:
1.
In the iLO Configuration Utility window, click Access Settings.
The Access Options tab data appears:
2. Click the Service tab. The Service tab data appears.
3. Edit the option(s) as necessary. Click Apply.
Access Settings–IPMI/DCMI
iLO enables you to send industry-standard IPMI and DCMI commands over the LAN. The IPMI/DCMI
port is set to 623 and is not configurable.
To edit access settings on the IPMI/DCMI tab:
1.
In the iLO Configuration Utility window, click Access Settings. The Access Options tab data is
displayed.
2. Click the IPMI/DCMI tab.
The IPMI/DCMI tab data appears:
Performing maintenance 55