HP ProLiant DL320e Gen8 Server User Manual
Page 64
3.
Edit the setting(s) as necessary. Click Apply.
Network Settings–SNTP
•
Use DHCPv4 Supplied Time Settings—Specifies whether iLO uses the DHCP server-supplied
time.
•
Use DHCPv6 Supplied Time Settings—Specifies whether iLO uses version 6 of the DHCP
server-supplied time.
•
Propagate NTP Time to Host—Specifies whether ILO uses NTP time instead of the DHCP
server-supplied time.
•
Primary Time Server—If DHCPv4 or DHCPv6 SNTP is not used, enter a time server address
in the Primary Time Server box.
•
Secondary Time Server—If DHCPv4 or DHCPv6 SNTP is not used, enter a secondary time
server address in the Secondary Time Server box.
•
Time Zone—A drop-down list of worldwide time zones.
To edit the settings on the SNTP tab:
1.
In the iLO Configuration Utility window, click Network Settings. The General tab data appears.
2.
Click the SNTP tab. The SNTP tab data appears.
64
Using Intelligent Provisioning