Alliance Laundry Systems 18 - Manual (Page 53)

© Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT
Installation
51 9001000
Steam Requirements
(Steam Heat Option Only) For washer-extractors equipped with optional steam
heat, install piping in accordance with approved
commercial steam practices. Steam requirements are
shown in Table 7.
Never touch internal or external steam
pipes, connections, or components. These
surfaces can be extremely hot and will
cause severe burns. The steam must be
turned off and the pipe, connections, and
components allowed to cool before the
pipe can be touched.
SW014
WARNING
Steam Supply Information
18-75 100/135 165/200
Steam inlet connection, in (mm) 3/8 (10) 1/2 (13) 3/4 (19)
Number of steam inlets 1 1 1
Recommended pressure, psi (bar) 30 – 80 (2.0 – 5.5) 30 – 80 (2.0 – 5.5) 30 – 80 (2.0 – 5.5)
Maximum pressure, psi (bar) 80 (5.5) 80 (5.5) 80 (5.5)
Table 7