HP OmniBook 5500 Notebook PC - Manual (Page 64)

64
2. Press FN+F2 to start the System Configuration utility.
3. From the Input/Output menu, click External Device.
4. In the Television Type box, select NTSC or PAL, then click OK.
5. From the Exit menu, click Save and Reboot. Click OK in the Save and Reboot
dialog box.
To connect an SVHS device
1. Make sure the device has an SVHS connector. Plug an SVHS video cable into
the connector.
2. Set the OmniBook's display resolution to 640x480 (other resolutions will not
work). See “ To change the display type” for more information.
3. Plug the SVHS video cable from the device into the SVHS Out connector on the
back of the OmniBook.
The OmniBook automatically senses and enables SVHS output.
Connect an External Mouse and Keyboard
Although the OmniBook comes with a full-sized keyboard, you can attach an
external keyboard and an external mouse.
In this section you’ll learn how to
•
Connect an external mouse or keyboard.
• Enable external FN keys.
• Connect an external mouse and keyboard at the same time.
To connect an external mouse or keyboard
If you attach an external mouse, you cannot use the built-in pointing device.