HP OmniBook 5500 Notebook PC - Manual (Page 76)

76
6. Replace the shield.
7. Replace the cable cover.
8. Plug in the ac adapter and dock the OmniBook.
9. Install the software for the card following the manufacturer’s instructions.
To install a PCI card
You can add one PCI card to the docking system. If you install a PCI card, you can
only install one ISA card—and it must be in the lower ISA slot.
Caution
Before removing the card from its bag, equalize static electricity by touching
the bag and the port replicator’s metal back plate at the same time. Handle the
card by its edges. Avoid touching electronic components.
1. Undock the OmniBook and unplug the ac adapter from the docking system.
2. Remove the cable cover.
3. Slide the metal shield from the base.
If the shield is difficult to slide, you can insert a pen or small screwdriver into the
gap between the shield and base and gently work the shield loose. Be sure to
loosen the shield evenly on both the right and left sides before attempting to
remove it.