HP OmniBook 5500 Notebook PC - Manual (Page 75)

75
Before removing the card from its bag, equalize static electricity by touching
the bag and the port replicator’s metal back plate at the same time. Handle the
card by its edges. Avoid touching electronic components.
1. Undock the OmniBook and unplug the ac adapter from the docking system.
2. Remove the cable cover.
3. Slide the metal shield from the base.
If the shield is difficult to slide, you can insert a pen or small screwdriver into the
gap between the shield and base and gently work the shield loose. Be sure to
loosen the shield evenly on both the right and left sides before attempting to
remove it.
4. Unscrew and remove the slot cover next to the card slot you want to use.
5. Slide the ISA card firmly into the connector and replace the slot cover screw.
Important If you have already installed a PCI card, you can only install one ISA
card—and it must be in the lower ISA slot.