HP StorageWorks XP10000 Disk Array - Manual (Page 18)

Command Line Interface Syntax and Parameters 18
Table 3-3 Notes on Executing CLI Commands
Item Description Related Commands
Changing the security or
deleting storage that
belongs to a LUN group. When changing the security or deleting LUNs that
belong to LUN groups, perform operations on each LUN
group.If you want to delete or change security for only
some of the LUNs that belong to a LUN group, use the
ModifyLunGroup
command to release the target
LUNs from the LUN group, and then perform the
operation for each LUN.
ModifyLunGroup
DeleteLun
AddWWNForLun
DeleteWWNForLun
Usable characters for logical
group, host, and storage
subsystem names. When the CLI command and Web Client are used at the
same time, usable characters for logical group, host,
and storage subsystem names are the following:
A
- Z a - z 0 - 9 - _ . @
Spaces can also be used, but you cannot use a name
that consists of spaces only.
If characters other than those shown above are used,
operation from Web Client might not be possible.
AddLogicalGroup
ModifyLogicalGroup
AddHost
ModifyHost
AddStorageArray
Using URLLink When the CLI command and Web Client are used at the
same time, other Web programs provided by Web Client
might not be able to start. Only a system administrator
who has expert knowledge can use this combination.
AddURLLink
DeleteURLLink
Using Disk/Cache Partition
(when using StorageWorks
XP12000/XP10000) When you use Disk/Cache Partition to create a LUSE
volume, path, or copy pair (Business Copy XP), specify
the same storage logical partition. If you specify a
different storage logical partition, the storage partition
administrator will not be able to manage the created
resource. AddLUSE
AddLun
AddReplication