HP StorageWorks XP10000 Disk Array - Manual (Page 105)

Command Line Interface Commands 105
serial number 35001. The host ID is 4, the Continuous Access XP instance number is 15, the port number is
50002
, and the copy pace is 14.
hdvmcli AddReplication -o "D:\logs\XP1024 AddReplication.log" "pvolhostid=5"
"pvolinstancenum=15" "pvolportnum=50001" "svolhostid=4" "svolinstancenum=15"
"svolportnum=50002" "pvolarraytype=HDS9980V" "pvolserialnum=15001" "pvoldevnum=11"
"svolarraytype=HDS9970V" "svolserialnum=35001" "svoldevnum=128"
"replicationfunction=ContinuousAccess" "copytracksize=14"
Command execution result 3:
RESPONSE:
An instance of ReplicationGroup
objectID=REPGROUP.2
replicationGroupID=2
groupName=HCMD_CG0002
pvolHostID=5
pvolInstanceNumber=15
pvolPortNumber=50,001
svolHostID=4
svolInstanceNumber=15
svolPortNumber=50.002
replicationFunction=ContinuousAccess
fenceLevel=Never copyTrackSize=14
List of 1 ReplicationInfo elements:
An instance of ReplicationInfo
objectID=REPINFO.15001.11.35001.128
pairName=HCMD_CP0000
pvolSerialNumber=15001
pvolArrayType=HDS9980V
pvolDevNum=11
pvolObjectID=LU.HDS9980V.15001.11
pvolPoolID=-1
svolSerialNumber=35001
svolArrayType=HDS9970V
svolDevNum=128
svolObjectID=LU.HDS9970V.35001.128
svolPoolID=-1
fenceLevel=Never
replicationFunction=ContinuousAccess
status=1
muNumber=-1
copyTrackSize=14
splitTime=-1
4-8-3 DeleteReplication
DeleteReplication deletes copy pair information from a RAID Manager configuration definition file and releases
the copy pair from the storage subsystem.
Users with access to this command:
• Yes: System Administrator, Storage Administrator
• No: Guest, Local Guest
• Restricted to permitted resources: Local System Administrator and Local Storage Administrator do not
have access range limitations.
NOTE: To delete a specific copy pair from a copy group, you must specify pvolserialnum, pvoldevnum,
svolserialnum
(or svolsequencenum), and svoldevnum. If you omit all of these parameters, the
system deletes all copy pairs in the specified copy group.
Table 4-80 DeleteReplication Command Parameters
Parameter Name Status Description
replicationgroupid Required Specify the copy group number.