3 storage array commands, 3-1 addarrayreservation, Storage array commands – HP StorageWorks XP10000 Disk Array User Manual
Page 24: Addarrayreservation, Table 4-7 replication commands
Command Line Interface Commands 24
Table 4-6
Server Management Commands
Command Name
Description
Section
AddURLLink
Adds the URL associated with the application, and links it to the Command View XP AE
object.
4-7-1
DeleteAlerts
Deletes information about one or more alerts that are managed by the Device Manager
server.
4-7-2
DeleteURLLink
Deletes the relationship between the application or web page, and the Device Manager
server object.
4-7-3
GetAlerts
Obtains information about one or more alerts that are managed by the Device Manager
server.
4-7-4
GetDebugLevel
Obtains the current debug level of the Device Manager server.
4-7-5
GetLogFile
Obtains the requested Device Manager server log file.
4-7-6
GetServerInfo
Obtains the version, URL, and other information about the Device Manager server.
4-7-7
GetURLLink
Obtains any or all of the Device Manager server URLLink objects.
4-7-8
ModifyDebugLevel
Sets the amount of debugging information created by the Device Manager server.
4-7-9
Table 4-7
Replication Commands
Storage Subsystems
Command Name
Description
XP12000/XP10000
and XP1024/XP128
XP512/XP48
Section
AddConfigFileForReplication
Create the configuration
definition file for copy pairs.
Y Y
4-8-1
AddReplication
Creates copy pairs. Y
Y
4-8-2
DeleteReplication
Deletes copy pairs.
Y
Y
4-8-3
GetReplicationControllerPair
Obtains RCU (remote path)
information registered in the
MCU (main control unit) in
storage subsystems managed
by the Device Manager server.
Y Y
4-8-4
ModifyReplication
Changes copy pair status.
Y
Y
4-8-5
4-3 Storage Array Commands
For information on storage array operations, please refer to the HP StorageWorks Command View XP
Advanced Edition Device Manager Web Client User Guide.
4-3-1 AddArrayReservation
AddArrayReservation
locks the target storage subsystem (see
Table 4-8
).
When a storage subsystem is locked, you can execute storage array commands and LUN commands. You can
execute the GetStorageArray command even if another user is locking the storage subsystem. If you do not
change the configuration of the storage subsystem or execute the ModifyArrayReservation command
within five minutes after locking the storage subsystem, the storage subsystem will be unlocked.
NOTE:
You cannot use the GUI to operate a storage subsystem when it is locked. If you want to operate a
locked storage subsystem, use the CLI commands.
You can execute the following commands:
•
AddStorageArray
•
AddHostStorageDomain
•
DeleteHostStorageDomain
•
AddLun
•
DeleteLun