HP StorageWorks XP10000 Disk Array - Manual (Page 38)

Command Line Interface Commands 38
mfAllocatedCapacity=0
mfUnallocatedCapacity=0
.
. (repeated for other ArrayGroup instances)
.
Command execution example 2: In this example, the CLI command obtains information only about one array
group (object ID: ARRAYGROUP.HDS9980V.10001.1.0) in a storage subsystem (serial number: 10001,
model: XP1024).
hdvmcli GetStorageArray -o "D:\logs\XP1024 GetStorageArray_ArrayGroup.log"
subtarget=ArrayGroup model=XP1024 serialnum=10001 objectID=ARRAYGROUP.HDS9980V.10001.1.0
Command execution result 2:
RESPONSE:
An instance of StorageArray
.
. (Attributes of StorageArray are omitted here)
.
List of 1 ArrayGroup elements:
An instance of ArrayGroup
objectID=ARRAYGROUP.HDS9980V.10001.1.0
chassis=1
number=0
displayName=1-1-1
raidType=RAID5(3D+1P)
emulation=OPEN-3
diskType=DKR2D-J072FC
diskSize=72
diskSizeInKB=149,225,472
controllerID=1
totalCapacity=203,925,600
allocatedCapacity=203,925,600
freeCapacity=0
autoLunCapacity=0
onDemandCapacity=0
totalFreeSpace=9,126,144
largestFreeSpace=9,126,144
substance=0
slprNumber=-1
clprNumber=-1
openTotalCapacity=203,925,600
openAllocatedCapacity=203,925,600
openFreeCapacity=0
openAutoLunCapacity=0
openOnDemandCapacity=0
imTotalCapacity=0
imAllocatedCapacity=0
imFreeCapacity=0
imAutoLunCapacity=0
imOnDemandCapacity=0
mfTotalCapacity=0
mfAutoLunCapacity=0
mfOnDemandCapacity=0
mfAllocatedCapacity=0
mfUnallocatedCapacity=0
4-3-12-2 GetStorageArray (subtarget=Commparameters)
GetStorageArray (subtarget=Commparameters)
obtains information about how to access one or all
storage subsystems.
Users with access to this command:
• Yes: System Administrator, Storage Administrator
• No: None