HP StorageWorks XP10000 Disk Array - Manual (Page 39)

Command Line Interface Commands 39
• Restricted to permitted resources: Guest, Local System Administrator, Local Storage Administrator, Local
Guest
Table 4-20 GetStorageArray (subtarget=Commparameters) Command Parameters
Parameter Name Status Description
model Optional Model of the storage subsystem. When you omit this parameter, you will
obtain information about the models of all storage subsystems.
serialnum
Optional Serial number of the storage subsystem. When you omit this parameter,
all the storage subsystems become the target.
subtarget
Required Specify
Commparameters
.
Command execution example: In this example, the CLI command obtains information about how to access a
storage subsystem (serial number: 10001, model: XP1024).
hdvmcli GetStorageArray -o "D:\logs\XP1024 GetStorageArray_CommParameters.log"
subtarget=CommParameters model=XP1024 serialnum=10001
Command execution result:
RESPONSE:
An instance of StorageArray
.
. (Attributes of StorageArray are omitted here)
.
List of 1 CommParameters elements:
An instance of CommParameters
userID=root
userPassword=hdvm
ipAddress=172.16.45.1
4-3-12-3 GetStorageArray (subtarget=Component)
GetStorageArray (subtarget=Component)
obtains information about the configuration of one or all
storage subsystems.
Users with access to this command:
• Yes: System Administrator, Storage Administrator
• No: None
• Restricted to permitted resources: Guest, Local System Administrator, Local Storage Administrator, Local
Guest
Table 4-21 GetStorageArray (subtarget=Component) Command Parameters
Parameter Name Status Description
model Optional Model of the storage subsystem. When you omit this parameter, you will
obtain information about the models of all storage subsystems.
serialnum
Optional Serial number of the storage subsystem. When you omit this parameter,
all the storage subsystems become the target.
subtarget
Required Specify
Component
.
Command execution example: In this example, the CLI command obtains information about the configuration
of a storage subsystem (serial number: 10011, model: XP512).
hdvmcli GetStorageArray -o "D:\logs\XP512 GetStorageArray_Component.log"
subtarget=Component model=XP512 serialnum=10011
Command result:
RESPONSE:
An instance of StorageArray
objectID=ARRAY.HDS9960.10011
name= [email protected]
description= XP512 (10011) at 10.208.114.140