HP StorageWorks XP10000 Disk Array - Manual (Page 51)

Command Line Interface Commands 51
List of 256 WWN elements:
An instance of WWN
WWN=88.77.77.77.77.77.00.01
nickname=Jane
An instance of WWN
WWN=88.77.77.77.77.77.00.02
nickname=Jone
.
. (repeated for other WWN instances)
.
Command execution example 2 (objectid parameter specified): In this example, the CLI command obtains
information about a path (objectID: PATH.HDS9980V.10001.7.0.99) that is set for a storage subsystem
(serial number: 10001, model:XP1024). The information includes information about the WWNs of this path, the
WWN groups, and the host.
hdvmcli GetStorageArray -o "D:\logs\XP1024 GetStorageArray_Path.log" subtarget=Path
model=XP1024 serialnum=10001 objectid=PATH.HDS9980V.10001.7.0.99
pathsubinfo=WWN,WWNGroup,HostInfo
Command execution result 2:
RESPONSE:
An instance of StorageArray
.
. (Attributes of StorageArray are omitted here)
.
List of 1 Path elements:
An instance of Path
objectID=PATH.HDS9980V.10001.7.0.99
devNum=99
portID=7
domainID=0
scsiID=15
LUN=99
wwnSecurityValidity=true
List of 2 WWN elements:
An instance of WWN
WWN=88.77.77.77.77.77.00.01
nickname=Jane
An instance of WWN
WWN=88.77.77.77.77.77.00.02
nickname=Jone
4-3-12-10 GetStorageArray (subtarget=PDEV)
GetStorageArray (subtarget=PDEV)
obtains the information about a PDEV in one or all storage
subsystems.
Users with access to this command:
• Yes: System Administrator, Storage Administrator
• No: None
• Restricted to permitted resources: Guest, Local System Administrator, Local Storage Administrator, Local
Guest
Table 4-28 GetStorageArray (subtarget=PDEV) Command Parameters
Parameter Name Status Description
model
Optional Model of the storage subsystem. When you omit this parameter, all the storage
subsystems become the target.
serialnum
Optional Serial number of the storage subsystem. When you omit this parameter, all the
storage subsystems become the target.
subtarget
Required Specify
PDEV
.