HP StorageWorks XP10000 Disk Array - Manual (Page 54)

Command Line Interface Commands 54
domainID=1
hostMode=Standard
displayName=CL1-A-1
nickname=HCMD0000
List of 2 WWN elements:
An instance of WWN
WWN=00.00.00.00.00.00.00.01
nickname=Jane
An instance of WWN
WWN=00.00.00.00.00.00.00.50
nickname=Jone
List of 1 LUNGroup elements
An instance of LUNGroup
objectID=LUNGroup.HDS9960.10001.0.0.hp
name=hp
nickname=hp
. (repeated for other Port instances)
4-3-12-12 GetStorageArray (subtarget=PortController)
GetStorageArray (subtarget=PortController)
obtains the information about a port controller in one
or all storage subsystems.
Users with access to this command:
• Yes: System Administrator, Storage Administrator
• No: None
• Restricted to permitted resources: Guest, Local System Administrator, Local Storage Administrator, Local
Guest
Table 4-30 GetStorageArray (subtarget=PortController) Command Parameters
Parameter Name Status Description
model
Optional Model of the storage subsystem. When you omit this parameter, all the storage
subsystems become the target.
serialnum
Optional Serial number of the storage subsystem. When you omit this parameter, all the
storage subsystems become the target.
subtarget
Required Specify
PortController
.
controllernum Optional Controller ID of the port controller in the subsystem. When you omit this parameter,
you will obtain information about all the port controllers.
controllersubinfo Optional Specific information about the port controller you intend to obtain. Available values
are IPAddress and PairedPortController. You can specify either one or both
of these values.
Command execution example 1: In this example, the CLI command obtains information about the port
controller for a storage subsystem (serial number: 10001, model: XP1024)
hdvmcli GetStorageArray -o "D:\logs\XP1024 GetStorageArray_PortController.log"
subtarget=PortController model=XP1024 serialnum=10001
Command execution result 1:
RESPONSE:
An instance of StorageArray
.
. (Attributes of StorageArray are omitted here)
.
List of 4 PortController elements:
An instance of PortController
objectID=CONTROLLER.HDS9980V.10001.1
cluster=1
card=1
controllerID=1