5-13 deletewwngroup, 5-14 modifylungroup, Deletewwngroup – HP StorageWorks XP10000 Disk Array User Manual
Page 81: Modifylungroup, Table 4-58 deletewwngroup command parameters
Command Line Interface Commands 81
Table 4-57
DeleteWWNForLunGroup Command Parameters
Parameter Name Status
Description
wwn
Required Comma-separated list of WWNs that exist in the LUN group.
Command execution example:
hdvmcli DeleteWWNForLunGroup -o "D:\logs\XP512 DeleteWWNForLUNGroup.log"
"serialnum=10001" "model=XP512" "port=19" "objectid=LUNGROUP.HDS9960.10001.19.hp"
"wwn=11.55.77.99.33.00.22.66,AA.AA.AA.AA.AA.AA.AA.AA"
Command execution result:
RESPONSE:
(Command completed; no data returned)
4-5-13 DeleteWWNGroup
DeleteWWNGroup
removes a WWN group from a port (XP512/XP48 subsystem only) (see
Table 4-58
). The
corresponding WWNs are not removed from the port.
Users with access to this command:
•
Yes: System Administrator, Storage Administrator, Local System Administrator, Local Storage
Administrator
•
No: Guest, Local Guest
•
Restricted to permitted resources: Local System Administrator and Local Storage Administrator do not
have access range limitations.
NOTE:
DeleteWWNGroup
is supported by StorageWorks XP512/XP48 storage subsystems only.
Table 4-58
DeleteWWNGroup Command Parameters
Parameter Name Status
Description
serialnum
Required
Serial number of the port’s storage array.
model
Required
Model of the port’s storage array.
port
Required Port
number.
wwngroup
Required
Nickname of the WWN group to be deleted from the port.
Command execution example:
hdvmcli DeleteWwnGroup -o "D:\logs\XP512 DeleteWwnGroup.log" "serialnum=10011"
"model=XP512" "port=19" "wwngroup=WG"
Command execution result:
RESPONSE:
(Command completed; no data returned)
4-5-14 ModifyLunGroup
ModifyLunGroup
modifies a LUN group assigned to a port of the target storage array (XP512/XP48
subsystem only) and adds paths in the LUN group (see
Table 4-59
).
Users with access to this command:
•
Yes: System Administrator, Storage Administrator, Local System Administrator, Local Storage
Administrator
•
No: Guest, Local Guest
•
Restricted to permitted resources: Local System Administrator and Local Storage Administrator do not
have access range limitations.