HP StorageWorks XP10000 Disk Array - Manual (Page 82)

Command Line Interface Commands 82
NOTE:
ModifyLunGroup
is supported by StorageWorks XP512/XP48 storage subsystems only.
Table 4-59 ModifyLunGroup Command Parameters
Parameter Name Status Description
serialnum
Required Serial number of the storage array in which the LUN group exists.
model Required Model of the storage array in which the LUN group exists.
port Required Port number of the LUN group.
objectid
Required Object ID of the LUN group.
groupelement
s
Required Comma-separated list of one or more object IDs of the paths to be added to the LUN group.
nickname Optional Unique nickname of the LUN group.
name Optional The name given to the LUN group.
Command execution example:
hdvmcli ModifyLunGroup -o "D:\logs\XP512 ModifyLunGroup.log" "serialnum=10001"
"model=XP512" "port=19"
"groupelements=PATH.HDS9960.10001.16.2.0,PATH.HDS9960.10001.16.2.1"
"objectid=LUNGROUP.HDS9960.10001.19.hp" "nickname=hp"
Command execution result:
RESPONSE:
An instance of StorageArray
.
. (Attributes of StorageArray are omitted here)
.
List of 1 Port elements:
An instance of Port
.
. (Attributes of Port are omitted here)
.
List of 1 LUNGroup elements:
An instance of LUNGroup
objectID= LUNGROUP.HDS9960.10001.0.19.hp
nickname=hp
List of 2 Path elements:
An instance of Path
objectID=PATH.HDS9960.10001.16.2.0
devNum=0
portID=19
domainID=16
scsiID=15
LUN=8
wwnSecurityValidity=true
.
. (repeated for other Path instances)
. .
4-5-15 ModifyWWNGroup
ModifyWWNGroup
modifies a WWN group assigned to a target storage array port (XP512/XP48 subsystem
only) and adds two or more WWN(s) to the WWN group (see Table 4-60 ).
A maximum of 127 WWN groups can be set for a port. Only the existing WWNs already used for the port can
be changed. You cannot change a WWN that belongs to a different WWN group, or to a different LUN or LUN
group.
Users with access to this command:
• Yes: System Administrator, Storage Administrator, Local System Administrator, Local Storage
Administrator