HP StorageWorks XP10000 Disk Array - Manual (Page 90)

Command Line Interface Commands 90
copyTrackSize=15
splitTime=-1
4-6-7 GetHostInfo
GetHostInfo returns either a selected HostInfo record or all the HostInfo on the Device Manager server
(see Table 4-67 ).
The name of the host that does not have access privileges is displayed as n/a.
Table 4-67 GetHostInfo Command Parameters
Parameter Name Status Description
objectid Optional Object ID of the HostInfo record to be retrieved. Omit this parameter to return all HostInfo
records.
NOTE: If you do not know the object ID of the required HostInfo record, you can obtain information about
all the HostInfo records by executing the GetHostInfo command.
Command execution example 1:
hdvmcli GetHostInfo -o "D:\logs\XP1024 GetHostInfo.log"
"objectid=HOSTINFO.MY_HOSTINFO_XP1024.0.15.1"
Command execution result 1:
RESPONSE
An instance of HostInfo
objectID=HOSTINFO.HIS_HOSTINFO_XP1024.0.15.1
name=HIS_HOSTINFO_XP1024
serialNumber=10001
arrayType=HDS9980V
ipAddress=172.16.64.159
mountPoint=C:
portID=7
domainID=0
scsiID=15
lun=3
devNum=3
osScsiBus=0
osScsiID=15
osLun=1
portWWN=11.22.33.44.55.66.77.88
fileSystemType=NTFS
fileSystemName=C:
sizeInMB=10
percentUsed=10
lastUpdated=1039003852
Command execution example 2:
hdvmcli GetHostInfo -o "D:\logs\XP1024 GetHostInfo.log"
Command execution result 2:
RESPONSE
An instance of HostInfo
objectID=HOSTINFO.HIS_HOSTINFO_XP1024.0.15.1
name=HIS_HOSTINFO_XP1024
serialNumber=10001
arrayType=HDS9980V
ipAddress=172.16.64.159
mountPoint=C:
portID=7
domainID=0
scsiID=15
lun=3