HP StorageWorks XP10000 Disk Array - Manual (Page 91)

Command Line Interface Commands 91
devNum=3
osScsiBus=0
osScsiID=15
osLun=1
portWWN=11.22.33.44.55.66.77.88
fileSystemType=NTFS
fileSystemName=C:
sizeInMB=10
percentUsed=10
lastUpdated=1039003852
.
. (repeated for other HostInfo instances)
.
4-6-8 ModifyHost
ModifyHost modifies information about a host server (see Table 4-68 ).
NOTE: ModifyHost cannot change WWN information for the external port of a host.
A Guest or Local Guest does not have operational permissions. A Local System Administrator and Local
Storage Administrator can specify the allowed hosts only. If other hosts that are not allowed are specified, an
error occurs.
Table 4-68 ModifyHost Command Parameters
Parameter Name Status Description
objectid Required Object ID of the host to be modified.
hostname
Optional New name for the existing host. Omit this parameter if you do not want to change the
name.
wwnlist
Optional Comma-separated list of WWNs to replace existing WWNs. When you omit this
parameter, all WWNs in the host will be deleted.
ipaddress Optional New IP address for the existing host. Omit this parameter if you do not want to change
the host IP address.
Command execution example:
hdvmcli ModifyHost -o "D:\logs\ModifyHost.log" "objectid=HOST.3" "hostname=snow"
"wwnlist=12.34.56.78.90.AB.CD.EF,01.23.45.67.89.AB.CD.EF" "ipaddress=172.18.32.9"
Command execution result:
RESPONSE
An instance of Host
objectID=HOST.3
name=snow
ipAddress=172.18.32.9
capacityInKB=0
hostType=-1
List of 2 WWN elements:
An instance of WWN
WWN=01.23.45.67.89.AB.CD.EF
An instance of WWN
WWN=12.34.56.78.90.AB.CD.EF
4-6-9 ModifyHostInfo
ModifyHostInfo
modifies a HostInfo record in the Device Manager server (see Table 4-69 ).
Users with access to this command:
• Yes: System Administrator, Storage Administrator, Local System Administrator, Local Storage
Administrator
• No: Guest, Local Guest