HP UPS Management Modules - Manual (Page 117)

Updating the firmware 117
Updating the firmware
Updating the firmware overview
To update the management module firmware from an application, download the HP Flash Utility on the
HP website (
http://www.hp.com/go/rackandpower ), and follow the attached instructions.
If the firmware is corrupted and updates using the HP Flash Utility are prevented, you can update the
firmware using the bootloader. This process is only available when the application is damaged.
To update the firmware from the bootloader:
1. Be sure that you have connected the configuration cable (" Connecting the configuration cable " on
page 21 ) to the management module and the host computer.
2. Launch a terminal emulation program, such as HyperTerminal (" Launching a terminal emulation
program " on page 21 ). The following menu appears:
RAM test: PASS
Boot Loader version 1.6.1
1) Serial Upgrade
2) TFTP Upgrade
3) Exit
Enter Option:
3. Follow the on-screen instructions.