HP Cisco MDS 9124e Fabric Switch for BladeSystem c-Class - Manual (Page 17)

Cisco MDS 9124e Fabric Switch for HP c-Class BladeSystem 17
2 Setup
This chapter provides the following information:
• Shipping carton contents
• Installation and safety considerations
• Installing the switch
• Setting the IP address
• Configuring the switch
• Recovering the admin password
Shipping carton contents
The Cisco MDS 9124e Fabric Switch for HP c-Class BladeSystem kit shipping carton contains three
items, identified in Figure 3 and Table 5 :
• Cisco MDS 9124e Fabric Switch for HP c-Class BladeSystem installation instructions
• Small bag containing black, plastic SFP dust covers that must be inserted in ports where Small
Form-factor pluggable (SFP) optical transceivers are not installed
• One Cisco MDS 9124e Fabric Switch with two or four SFPs installed. Models include:
• Cisco MDS 9124e 12-Port Fabric Switch with eight internal and four external active ports and
two 4Gb SFPs installed
• Cisco MDS 9124e 24-Port Fabric Switch with sixteen internal and eight external active ports
and four 4Gb SFPs installed
Figure 3 Carton contents
Table 5 identifies the Cisco MDS 9124e Fabric Switch components.
Table 5 Cisco MDS 9124e Fabric Switch components
Item Description
1 Cisco MDS 9124e Fabric Switch
scale: 3/8" = 1"
EX T 5 EX T 6 EX T 7 EX T 8
17 18 19 20
!
Cis co M DS 91 24e CISCO
1 2 3
181830