HP Cisco MDS 9124e Fabric Switch for BladeSystem c-Class - Manual (Page 53)

Cisco MDS 9124e Fabric Switch for HP c-Class BladeSystem 53
C Switch technical specifications
This appendix provides the following information:
• General specifications
• Weight and physical dimensions
• Environmental requirements
• Supported HBAs
• Supported SFPs
General specifications
Table 13 lists general specifications for the Cisco MDS 9124e Switch.
Table 13 General specifications
Specification Description
Configurable port types F_Port, FL_Port, and E_Port
Media types
Small Form-Factor Pluggable (SFP) laser. 1/2/4Gb short wave up to
500 m (1,640 ft.) and 1/2/4Gb long wave up to 10 km
EMC emissions An operating SAN Switch conforms to the emissions requirements
specified by the following regulations:
• FCC Rules & Regulations, Part 15 subpart B, Class A
• CSA C108.8 Class A
• VCCI Class A ITE
• CISPR 22 Class A
• EN55022 Class A
• AS/NZF 3548: 1995 Class A
• CNS13438 Class A
• ICES-003 Class A
• Korean EMC Requirements
• BSMI Standard CNS 13438
• EMC Directive 89/336/EEC
• EN5022 Level A
• EN50082-2/EN55024: 1998