HP Virtual Connect 8Gb 24-port Fibre Channel Module for c-Class BladeSystem - Manual (Page 34)

Command line 34
Item Description
ConnectionID
(optional)
The ID of an existing FC SAN connection. The ID format is <ProfileName:Port>.
Use <ProfileName:*> to display all FC SAN connections of a profile. Use "*" to
display all FC SAN connections in the domain.
Examples
->show fc-connection
Displays all FC SAN connections in the domain
->show fc-connection Profile1:*
Displays all FC SAN connections of a profile named Profile1
->show fc-connection Profile1:1
Displays a specific FC SAN connection of a profile named Profile1
fcoe-connection
Manage FCoE connections.
Supported actions: add, help, remove, set, show
Item Description
add fcoe-connection Add a new FCoE connection to an existing server profile.
For more information, see "General requirements for adding FC or FCoE
connections (on page 144 )."
Syntax
add fcoe-connection <ProfileName> [Fabric=<FabricName>]
[SpeedType=<1Gb|2Gb|4Gb|8Gb|Custom|Disabled>]
[CustomSpeed=<100Mb-10Gb>]
[WWNAddressType=<Factory-Default|User-Defined>]
[PortWWN=<WWN address>] [NodeWWN=<WWN address>]
[MACAddressType=<Factory-Default|User-Defined>]
[EthernetMac=<MAC Address>]
Parameter
ProfileName (required) The name of an existing profile to which the new connection is added
Properties
Fabric (optional) The name of an existing fabric created on an FCoE module to associate with the
connection. If the fabric name is not specified, the connection is marked as
“Unassigned” and associated with a specific bay.
SpeedType (optional) The requested operation speed for the server port. Valid values include "1Gb",
"2Gb", "4Gb", "8Gb", "Custom", and "Disabled". The default value is "4Gb".
If the SpeedType is "Custom", you can configure any speed from 100Mb to
10Gb in 100Mb increments.
CustomSpeed (required
if SpeedType is Custom)
The user-defined speed for the server port. Valid values include 100Mb to
10Gb configured in 100Mb increments.
WWNAddressType
(optional)
The source of WWN address assignments to be used during the creation of the
new connection. If not specified, the default is the domain default. If
"User-Defined" is specified, both a Port WWN and Node WWN must also be
specified. Valid values include "Factory-Default" and "User-Defined".
PortWWN (required if
WWNAddressType is
User-Defined)
The user-defined Port WWN address to use for the connection. The PortWWN
must be an unused WWN address.
NodeWWN (required if
WWNAddressType is
User-Defined)
The user-defined Node WWN address to use for the connection. The
NodeWWN must be an unused WWN address.
MACAddressType
(optional)
The source of MAC address assignments to be used during the creation of the
new connection. If not specified, the default is the domain default. If