HP Storage Mirroring V5 Software - Manual (Page 278)

A - 42
-205 The monitor set you are attempting to enable is already in use.
-206 The monitor you are attempting to use with monitor set does not exist.
-209 The machine you are attempting to failback is not failed over.
-210 The machine you are attempting to failover is already failed over.
-211 The machine you are attempting to failover is not currently being monitored.
-213 IP address placeholders on the target are unavailable.
-214 The specified target NIC was not found. Failover monitoring is not started.
-215 The Storage Mirroring source module, which contains the failover module, is not loaded.
-216 The source has failed.
Error
Code
Description