Vc domain checkpoint traps, Vcdomainstackinglinkredundancystatuschange, Vctesttrap – HP Virtual Connect Flex-10 10Gb Ethernet Module for c-Class BladeSystem User Manual
Page 41: Snmp configuration (vc-enet)
Virtual Connect domains 41
VC domain checkpoint traps
The domain checkpoint trap indicates configuration changes have been saved in non-volatile memory and
copied (check-pointed) to the horizontally adjacent module.
vcCheckpointTimeout
The checkpoint valid status remained false for more than five minutes.
vcCheckpointCompleted
A checkpoint operation has completed following a checkpoint timeout trap. The checkpoint valid status is true
again. This trap is not sent on every checkpoint completion, but only on a checkpoint completion after a
vcCheckpointTimeout trap has been sent.
vcDomainStackingLinkRedundancyStatusChange
The stacking link connection redundancy status has changed. The vcDomainStackingLinkRedundant OID
contained within this trap indicates whether all VC-Enet modules will remain connected to each other with the
loss of a link.
vcTestTrap
The VC domain test trap is received when the administrator sends a test trap via the VC GUI or CLI. The test
trap is sent to all configured trap destinations.
SNMP Configuration (VC-Enet)
By enabling SNMP for VC-Enet modules, network management systems can monitor VC-Enet modules in the
domain for events that might require corrective actions, such as warnings and errors. You must have network
or domain user permissions to administer SNMP Enet settings.
The HP ProLiant Gen8 Troubleshooting Guide, Volume II: Error Messages provides a list of error messages
and information to assist with interpreting and resolving error messages on ProLiant servers and server
blades. To view the guide, select a language:
•
English
•
French
•
Spanish
•
German
•
Japanese
•
Simplified Chinese