HP Virtual Connect Flex-10 10Gb Ethernet Module for c-Class BladeSystem - Manual (Page 94)

Virtual Connect networks 94
Select Monitored Ports screen
The Select Monitored Ports screen appears when you click the Select Ports button on the Ethernet Settings
(Port Monitoring) screen. You can select up to 16 server ports to monitor. Although you can select individual
FlexNICs as monitored ports, VCM mirrors traffic on a physical port basis. To filter the list of ports, select one
or more of the boxes at the top of the screen.
The following table describes the available actions in the Select Monitored Ports screen.
Task Action
Select a port to be monitored Select the checkbox corresponding to the port.
Remove a port from the
monitored list
Clear the checkbox corresponding to the port.
Filter the list by enclosure Select All Enclosures or a single enclosure from the Filter by Interconnect
Module enclosure pull-down list.
Filter the list by I/O bay Select All Bays or a single I/O bay from the Filter by Interconnect Module
module bay pull-down list. Only I/O bays with VC-Enet interconnect
devices are displayed.
Filter the list by interconnect
module server port
Select All Ports or a single port from the Filter by Interconnect Module ports
pull-down list.
Filter the list by a specific profile Select All Profiles or a single profile from the Filter by Profile profiles
pull-down list.
Filter the list by a profile
connection
Select All Profile Connections or a single profile connection from the Filter
by Profile profile connection pull-down list.
Filter the list by server bay Select All Bays or a single bay from the Filter by Physical Server bay
pull-down list.
Filter the list by server port Select All Ports or a single port from the Filter by Physical Server port
pull-down list.