HP 9000 rp5400 Servers - Manual (Page 26)

E-Series cabinets include the following product numbers: A5134A, A5136A, A5136A, A4900A,
A4901A, A4902A, J1500A, J1502A, and J1502A.
Identifying Static Rail Kit
Hewlett-Packard has currently approved two static rail kits for use in cabinet mounting the
rp54xx server. They are illustrated below.
Installing Stationary Rails
The installation of stationary rails is similar for most cabinet and rail combinations.
The key considerations to are:
•
Ensure that all safety precautions are read, understood, and observed
• Follow all installation instructions provided with the cabinet and rail kits, and
• Ensure that the rails extend out from the cabinet posts sufficiently to properly and safely
support the equipment being installed.
To install an rp54xx server on stationary rails in an approved cabinet proceed as follows:
26 Server Unpacking and Installation