HP Designjet 350c Printer - Manual (Page 100)

This is the magenta on page 5–8 (seq: 100)
5–8
Company confidential. Pelican User’s Guide, Ed 1, Final. Freeze Status: frozen
This is the cyan on page 5–8 (seq: 100)
This is the black on page 5–8 (seq: 100)
2
When you have correctly loaded the sheet
(when the
Ready light is on and steady),
press the Continue Plotting keys
simultaneously.
The Color Cartridge Test Sheet is printed.
An example is shown on page 5–9.
Form
Feed
Continue
Plotting +
3 When the Load Media light comes on (not flashing), the plot is finished. Simply
remove the sheet from the plotter.
Notice that there are two parts, related to two quite distinct tasks:
The part headed To check the nozzles lets you see if any of the cartridges is
not printing correctly. It is to be used when cleaning the nozzles (priming) – see
page 7–7. Some examples of the patterns when a cartridge is not printing
correctly are shown here:
White streak
White gaps
1002
Special internal plots
Using the Color Cartridge Test Sheet
Localization Note. JKCT: Steps 3 and 4 very similar to Parrot UG p3-9.