HP Designjet 350c Printer - Manual (Page 67)

2–27
Company confidential. Pelican User’s Guide, Ed 1, Final. Freeze Status: frozen
This is the cyan on page 2–27 (seq: 67)
This is the black on page 2–27 (seq: 67)
Unloading media
Drying time
On some media types, the ink needs to dry before the plot is unloaded. Since the
plotter knows which media type you are using, it allows the appropriate drying
time to elapse before the plotting process is complete – for example, before the
Load Media light comes on to let you know you can unload a plotted sheet.
Typical Drying Times (minutes)
Print Quality
HP Media Type
Fast Normal
or Best
HP Opaque Bond 0.5 1.5
HP Translucent Bond 0.5 1.0
HP Natural Tracing Paper 0.5 1.0
HP Vellum 1.0 3.0
HP Coated Paper 0 0.25
HP Heavyweight Coated Paper 0 0.25
HP Matte Film Not
recom-
4.0
HP Clear Film
recom-
mended 4.0
HP High-Gloss White Film Not
recom-
mended
4.0
Notice that you can unload some media types immediately.
Working with media
Unloading media
MEDIA
2
Localization Note. .This page very similar to Loquillo UG p3-21. J: In the first column of
the table, please add YHP Tracing Paper in the same cell as Natural Tracing Paper, and
with the same times.
350C