HP Designjet 350c Printer - Manual (Page 101)

This is the yellow on page 5–9 (seq: 101)
This is the magenta on page 5–9 (seq: 101) Red
Green
5–9
5–9
5–9
Company confidential. Pelican User’s Guide, Ed 1, Final. Freeze Status: frozen
This is the cyan on page 5–9 (seq: 101)
This is the black on page 5–9 (seq: 101)
HP DesignJet 350C Color Cartridge
Test Sheet
1
2
3
a
b
Jagged lines = bad
Straight lines = good
In each of the six boxes below, look for the best pair of lines.
If the current setting is not the best pair,
change it by filling in the oval above the best pair.
If you changed any
setting, reload the sheet
as shown here.
To check the cartridge alignment
If any color has gaps or streaks, then that cartridge is either out of ink or needs priming (see User’s Guide).
Examine the patterns below.
Current
Ready
Setup
Pencil or
black pen
To check the nozzles
Best
Localization Note FIGSPJ: You have already delivered this alignment sheet as Job #150.
Please ensure same text here. KCT:As agreed, please leave the text in this sheet in
English here and refer to chapter 12, where there is a translated version.
INTERNAL
5
PLOTS
Special internal plots
Using the Color Cartridge Test Sheet