Setting the subnet mask, Using the front serial port, Installation completion – HP Console Management Controller User Manual
Page 43: Using the front serial port -25, Installation completion -25
Installation 2-25
Compaq Confidential – Need to Know Required
Writer: A. J. Scheckelhoff Project: Compaq Console Management Controller User Guide Comments:
Part Number: 218258-002 File Name: c-ch2 Installation.doc Last Saved On: 7/19/01 10:30 PM
Setting the Subnet Mask
■
Press Scroll Up
and Enter/Alarm Silence to set the Subnet Mask
address. The default setting is 0.0.0.0.
■
The CMC will automatically reboot.
NOTE: For more detailed configuration instructions, see Chapter 4, “Software.”
Using the Front Serial Port
The serial port on the front panel may be used with a laptop computer to
configure the CMC.
NOTE: For more detailed configuration instructions, see Chapter 4, “Software.”
Figure 2-24. Connecting to the serial port
Installation Completion
Installation is now complete. For information on operating the CMC, see
Chapter 3, “Operation.” Use the Compaq website at www.compaq.com as an
additional information source.