HP Console Management Controller - Manual (Page 79)

Software 4-29
Compaq Confidential – Need to Know Required
Writer: Hilary Stead Project: Compaq Console Management Controller User Guide Comments:
Part Number: 218258-002 File Name: e-ch4 Software.doc Last Saved On: 6/20/01 8:25 PM
Table 4-3
CMC Terminal Program Menus
Main Menu Items Submenu 1 Items Submenu 2 Items Brief Description
Values Display rack information.
Status Display rack status.
Network
configuration
IP configuration
IP Address
IP Subnetmask
IP Router Set network addresses.
Trap receiver
configuration
IP Trap receiver
Enable/Disable
IP Trap receiver
Enable/Disable
IP Trap receiver
Enable/Disable
IP Trap receiver
Enable/Disable
Set up to 4 trap receiver IP
addresses. Trap receiver
number 1 is dedicated to
the Compaq Intelligent
Rack Manager software.
Any IP address entered in
number 1 will be over
written when used with the
software.
SNMP IP Access
SNMP Manager
SNMP Manager
SNMP Manager
SNMP Manager
SNMP Manager
SNMP Manager
SNMP Manager
SNMP Manager
SNMP Manager
SNMP Manager
SNMP Manager
SNMP Manager
Set the authorized IP
addresses of the
management computers.
In the default setting (all
addresses set to 0.0.0.0),
all network IP addresses
are SNMP-authorized. If
one or more IP addresses
are entered, only those IP
addresses have SNMP
authorization. SNMP
communication with the
CMC can only be
established from this
system.
continued