HP LaserJet 4100 Multifunction Printer series - Manual (Page 76)

74 Chapter 7 – Product maintenance EN
Cleaning the ADF paper delivery guide
1 Turn the power off.
2 Wipe the outside of the product with a dampened cloth.
3 Raise the ADF.
4 Open the delivery guide by pressing in the small plastic handles on either side of the
delivery guide.
5 Remove the clear, plastic sheet.
6 Use a clean, soft, dry cloth to wipe the inside surface of the clear, plastic sheet.
CAUTION Do not use water, liquid detergents, or solvents. Liquids might drip down into the
mechanical parts and damage them.
7 Reinstall the clear, plastic sheet by sliding it under the gray ribbed guide, which is
located under the white padded sheet.
Note Make sure that the free end of the clear, plastic sheet is tucked behind the gray ribbed
guide and the white padded sheet.
8 Align the holes in the sheet with the small plastic spindles in the delivery guide.
Press the clear, plastic sheet down onto the spindles.
9 Close the delivery guide cover. You should hear the delivery guide cover plastic
handles click into place.
10 Wipe the outside surface of the delivery guide with the cloth.