HP LaserJet 4100 Multifunction Printer series - Manual (Page 34)

32 Chapter 2 – Basic operations EN
Job-handling priorities
The HP LaserJet 4100 mfp series is designed to handle multiple jobs efficiently.
Scanning and printing functions operate independently. You can use the scanner for
digital-sending while a network printing job is underway, and printing can proceed while
the scanner is in use.
● To scan a job for sending or copying while printing is underway, place the document
in the ADF or on the scanner glass and press
S TART .
● If the MFP is printing and a copy is required, the copy job can be programmed and
scanning will continue.
● The system can also be configured to allow you to interrupt a current printing or
copying job. You are asked if you wish to interrupt the current job or wait until it has
finished. If you interrupt the job, it resumes as soon as your walk-up job is complete.
Note Job-handling priorities can be changed by the system administrator through the System
Setup menu either at the control panel or through the embedded Web server or HP Web
JetAdmin. See
“Configuring multitasking priorities” on page 141 .