HP LaserJet 4100 Multifunction Printer series - Manual (Page 74)

72 Chapter 7 – Product maintenance EN
Cleaning procedure
1 Turn the product off and unplug the power cord.
2 Open the top cover and remove the toner cartridge.
WARNING!
Avoid reaching too far into the printer. The adjacent fusing area
might be hot. Wait half an hour until the fuser cools.
CAUTION
To prevent damage to the toner cartridge, do not expose it to
light for more than a few minutes.
3 Wipe any dust or dirt off the paper-feed guides (shaded
areas) with a dry, lint-free cloth.
Note
If toner gets on your clothing, wipe it off with a dry cloth and
wash the clothing in cold water. (Hot water sets toner into fabric.
4 Using the green handle, lift the paper-access plate and wipe
off any residue with a dry, lint-free cloth.
5 Reinstall the toner cartridge, close the top cover, plug the
power cord in, and turn the product on.
2
3
4
1
5