HP Designjet 10000s Printer series User Manual
Page 44
Advertising
6.
Open the rear cover (1).
7.
Move the media edge guards (1) to each end of the platen so they will not be hidden under the media.
8.
Lift the media load lever (1).
9.
Set the feed direction switch (1) to select the way the media is going to be printed, either on the inside
or the outside of the media.
34
Chapter 2 How do I perform basic media operations?
ENWW
How
do
I p
erf
or
m b
asic m
edia
o
p
erat
ions?
Advertising