HP Virtual Connect Flex-10 10Gb Ethernet Module for c-Class BladeSystem - Manual (Page 19)

Command line 19
Item Description
-> import enclosure 192.168.0.120
Imports a remote enclosure that is already discovered
Item Description
remove enclosure Remove a remote enclosure that has been imported into the domain. The local
enclosure cannot be removed from the domain using the remove enclosure
command.
Syntax
remove enclosure <EnclosureID | *>
Parameter
EnclosureID
(required)
The enclosure ID of the remote enclosure to be removed from the domain, where
"*" removes all the remote enclosures that exist in the domain. The enclosure IDs
can be identified for a particular enclosure by using the show enclosure
command. The local enclosure cannot be removed from the domain with this
command.
Examples
->remove enclosure encl
Removes a remote enclosure
->remove enclosure *
Removes all remote enclosures from the domain
Item Description
show enclosure Display all enclosures in the domain.
Syntax
show enclosure [<EnclosureID>|*]
Parameter
EnclosureID
(optional)
The ID of an enclosure in the domain. If specified, then only details for the
specified enclosure appear.
Examples
->show enclosure
Displays a summary listing of all enclosures
->show enclosure *
Displays detailed information for all enclosures
->show enclosure enc0
Displays detailed information for a specific enclosure
enet-connection
Manage Ethernet network connections.
Supported actions: add, help, remove, set, show
Item Description
add enet-connection Add a new Ethernet network connection to an existing server profile.
The maximum number of Ethernet connections that can be added to a
server profile is 128.
Syntax
add enet-connection <ProfileName>
[Network=<NetworkName>]
[PXE=<enabled|disabled|UseBios>]
[AddressType=<Factory-Default|User-Defined>]
[EthernetMAC=<MAC Address> iScsiMAC=<MAC Address>]