HP Virtual Connect Flex-10 10Gb Ethernet Module for c-Class BladeSystem - Manual (Page 47)

Command line 47
Item Description
poweron server Power on one or more physical servers.
Syntax
poweron server <ServerID|*> [-Timeout=<timeout>]
Parameter
ServerID (required) The reference ID of a server in the domain. The format of the server ID is
<EnclosureID:DeviceBay>. If the EnclosureID is not provided, then the
primary or local enclosure is used by default. "*" powers on all servers in the
domain.
For a multi-blade server, the ServerID must be that of the monarch bay. This is the ID
displayed by the show server command.
Option
Timeout The timeout period (in seconds) to wait for the operation to complete. The default
timeout is 60 seconds.
Examples
->poweron server 2
Powers on the specific server in bay 2 of the primary enclosure
->poweron server *
Powers on all servers in the domain
->poweron server enc0:*
Powers on all servers in a specific enclosure
->poweron server * -Timeout=120
Powers on all servers and specifies a custom timeout of 2 minutes
->poweron server enc0:1
Powers on a specific multi-blade server that occupies bays 1-4 of the primary
enclosure
Item Description
reboot server Reboot one or more physical servers.
Syntax
reboot server <ServerID|*> [-Force]
[-ForceOnTimeout] [-timeout=<timeout>
Parameter
ServerID (required) The reference ID of a server in the domain. The format of the server ID is
<EnclosureID:DeviceBay>. If the Enclosure ID is not provided, then the
primary or local enclosure (enc0) is used by default. "*" reboots all servers in the
domain.
For a multi-blade server, the ServerID must be that of the monarch bay. This is the ID
displayed by the show server command.
Options
Force Forces a reboot operation without waiting for the OS to shut down gracefully. This
option should be used only as a last resort because it can cause potential data loss
on the server.
ForceOnTimeout Attempts a graceful shutdown, but if the server does not shut down within the
timeout period (default is 60 seconds), then the server is forced to reboot.
Timeout Specifies the timeout period (in seconds) to wait for the operation to complete (per
server). The default timeout is 120 seconds.
Examples
->reboot server 2
Reboots the specific server in device bay 2 of the primary enclosure
->reboot server enc0:2 -force
Reboots a server using the force option