HP Virtual Connect Flex-10 10Gb Ethernet Module for c-Class BladeSystem - Manual (Page 18)

Command line 18
Item Description
show domain Display general Virtual Connect domain information, including the Virtual Connect
domain name, the VCM domain IP address settings, and MAC/WWN address
settings for the domain.
Syntax
show domain [addressPool]
Parameter
addressPool
(Optional)
Displays all the VC-defined address pool range available for use
Examples
->show domain
Displays domain information
->show domain addressPool
Displays the VC-defined address pools for the domain
enclosure
Manage general enclosure settings and information.
Supported actions: help, import, remove, show
Item Description
import enclosure Import local and remote enclosures into the Virtual Connect domain. Virtual
Connect supports up to four c7000 enclosures in a single domain.
Syntax
import enclosure [IpAddress] [UserName=<username>]
[Password=<password>] [DoubleDense=<True|False>]
For enclosures that are not imported, the password field is optional on the
command line. If not specified on the command line, the system interactively
prompts the user for the same password.
Parameter
IpAddress (Optional) The IP address or DNS name of the remote enclosure to be imported. If the IP
address is not given, then the local enclosure is assumed.
Properties
UserName (Required for
enclosures that are
not imported)
A valid user name of the Onboard Administrator user for the enclosure to be
imported.
Password (Required) A valid OA user password for importing the enclosure. If no password is given at
the command line, the system interactively prompts the user for a password
during the import operation.
DoubleDense
(Optional)
If the enclosure being imported supports double-dense servers, then this property
enables the device bay display format to support a display for double-dense
servers. The default behavior is display for single-dense servers in the enclosure.
Examples
->import enclosure UserName=Administrator Password=fgg7h*1
Imports the local enclosure into the domain
->import enclosure UserName=Administrator Password=fgg7h*1
DoubleDense=true
Imports the local enclosure with a double-dense device bay display format
-> import enclosure 192.168.0.120 UserName=MyOaUser
Password=dgfsfdsjd
Imports a remote enclosure into the domain
-> import enclosure
Imports the local enclosure that is already discovered