HP Virtual Connect Flex-10 10Gb Ethernet Module for c-Class BladeSystem - Manual (Page 23)

Command line 23
Item Description
from a single shared uplink, and the VLAN ID cannot be modified.
Setting the value to "false" enables the user to select any VC Ethernet network for
the server Ethernet connections, and VLAN ID mappings can be modified to
ensure uniqueness.
SharedServerVLanId can be "true" only if VLanTagControl is set to "Map".
PrefSpeedType
(optional)
The default connection speed for any Ethernet connection using multiple
networks. Valid values include "Auto" and "Custom". "Custom" allows the user
to configure the preferred speed. The default value is "Auto".
PrefSpeed (required if
PrefSpeedType is
Custom)
The default connection speed for any Ethernet connection using multiple
networks. Valid values range from 100Mb to 10Gb in 100Mb increments.
MaxSpeedType
(optional)
Maximum connection speed for any Ethernet connection using multiple networks.
Valid values include "UnRestricted" and "Custom". "Custom" allows the user to
configure the preferred speed. The default value is "Unrestricted".
MaxSpeed (required if
MaxSpeedType is
Custom)
The maximum connection speed for any Ethernet connection using multiple
networks. Valid values range from: 100Mb to 10Gb in 100Mb increments.
Examples
->set enet-vlan VLanTagControl=Map SharedServerVLanId=true
Sets the VLanTagControl to Map and SharedServerVLanId to Enabled
->set enet-vlan PrefSpeedType=Custom PrefSpeed=500
MaxSpeedType=Custom MaxSpeed=2500
Sets the preferred connection speed for all connections using multiple networks to
500Mb, and the maximum connection speed to 2.5Gb
Item Description
show enet-vlan Display general Ethernet VLAN configuration settings.
Syntax
show enet-vlan
Example
->show enet-vlan
Displays Ethernet VLAN configuration settings
external-manager
Manage external manager settings and information.
Supported actions: remove, help, set, show
Item Description
remove
external-manager
Remove an existing external manager (VCEM) and regain local management
profile control of the domain.
When releasing the profile control, it is mandatory to specify values for each
MacType, WwnType, and ServerIdType.
Syntax
remove external-manager [-quiet] [UserName=<username>]
[MacType=<Factory-Default| User-Defined>] [MacStart=<MAC
address>] [MacEnd=<MAC address>]
[WwnType=<Factory-Default|User-Defined>] [WwnStart=<WWN
address>] [WwnEnd=<WWN address>]
[ServerIdType=<Factory-Default| User-Defined>]
[ServerIdStart=<ServerId address>] [ServerIdEnd=<ServerId
address>]