HP Virtual Connect Flex-10 10Gb Ethernet Module for c-Class BladeSystem - Manual (Page 55)

Command line 55
Item Description
are "PortStatus", "PortThreshold", "Other", "All", and "None".
Multiple categories can be specified, separated by commas.
FcCategories The Virtual Connect Fibre Channel trap categories to send to the destination. Valid
values are "PortStatus", "Other", "All", and "None".
Multiple categories can be specified, separated by commas.
Examples
->set snmp-trap MyTrap1 Community=public
Sets the trap community
->set snmp-trap MyTrap1 Severity=All FcCategories=None
EnetCategories=None
Sets all trap severities, and also sets the Fibre Channel and Ethernet categories to
none
Item Description
->show snmp-trap Displays the SNMP traps that have been configured
Syntax
show snmp-trap [Name| *]
Parameter
Name (optional) The name of the trap configuration to be displayed. If no trap name is specified, or
"*" is entered, then all configured traps are displayed.
Examples
->show snmp-trap MyTrap1
Displays the SNMP trap configuration for a single trap
->show snmp-trap *
Displays all configured SNMP traps
Item Description
->test snmp-trap Generates an SNMP test trap and sends it to all configured destinations.
Traps participating in the test must be configured, at a minimum, with the following
attributes:
DomainCategories: DomainStatus
Severity: Info
Syntax
test snmp-trap
Example
->test snmp-trap
Generates an SNMP test trap and sends it to the configured destinations
ssh
Manage SSH configuration and information.
Supported actions: help, load, remove, show
Item Description
load ssh Transfer the SSH key from a remote FTP server and apply it to the Virtual Connect
domain. A customized SSH key enables additional security for SSH clients that are
allowed to access the domain configuration. If a new custom SSH key is applied, then
the SSH clients must be configured correctly to have access.
Syntax
load ssh Address=<ftp://user:password@ipaddress>
FileName=<name>
Properties