HP Virtual Connect Flex-10 10Gb Ethernet Module for c-Class BladeSystem - Manual (Page 85)

Command line 85
Name RFC Description
occurrence of an event that causes
the PHY to indicate 'Data reception
error' on the GMII. The count
represented by an instance of this
object is incremented at most once
per carrier event, even if multiple
symbol errors occur during the
carrier event. This count does not
increment if a collision is present.
Discontinuities in the value of this
counter can occur at re-initialization
of the management system, and at
other times as indicated by the value
of ifCounterDiscontinuityTime.
Fibre channel ports
FC uplink ports
Name RFC Description
numAddressErrors FCMGMT-
MIB connUnitPortStatCountAddressErrors -
Count of frames received with unknown
addressing. e.x. unknown SID or DID.
the SID or DID is not known to the routing
algorithm.
numBBCreditZero FCMGMT-
MIB
connUnitPortStatCountBBCreditZero -
Count of transitions in/out of BBcredit
zero state. The other side is not
providing any credit.
numBytesRx N/A Total number of bytes received.
numBytesTx N/A Total number of bytes transmitted.
numCRCErrors FCMGMT-
MIB connUnitPortStatCountInvalidCRC -
Count of frames received with invalid
CRC. This count is part of the Link Error
Status Block (LESB). (FC-PH 29.8). Loop
ports should not count CRC errors
passing through when monitoring.
numClass3Discards FCMGMT-
MIB connUnitPortStatCountClass3Discards -
Count of Class 3 Frames that were
discarded upon reception at this port.
There is no FBSY or FRJT generated for
Class 3 Frames. They are simply
discarded if they cannot be delivered.
numEncodingDisparityE
rrors
FCMGMT-
MIB connUnitPortStatCountEncodingDisparit
yErrors - Count of disparity errors
received at this port.
numFBSYFrames
FCMGMT-
MIB connUnitPortStatCountFBSYFrames -
Count of times that FBSY was returned to
this port as a result of a frame that could
not be delivered to the other end of the
link. This occurs if either the Fabric or the