HP Officejet Pro K8600 Printer - Manual (Page 22)

Media (1) Left
margin (2) Right
margin (3) Top
margin (4) Bottom
margin*
NOTE: If
you are
using the
duplexer
(available
with some
models), the
minimum
bottom
margin must
match or
exceed 20
mm (0.79
inch).
Envelopes 3.3 mm (0.13
inch) 3.3 mm (0.13
inch) 16.5 mm
(0.65 inch) 16.5 mm
(0.65 inch)
Panorama 3.3 mm (0.13
inch) 3.3 mm (0.13
inch) 3.3 mm (0.13
inch) 3.3 mm (0.13
inch)
* To achieve this margin setting on a computer running Windows, click the Advanced
tab in the print driver, and select Minimize Margins.
Load media
This section provides instructions for loading media into the device.
To load Tray 1 (main tray)
1. Lift the output tray.
2. Insert the media print-side down along the right of the tray. Make sure the stack of
media aligns with the right and back edges of the tray, and does not exceed the
line marking in the tray.
NOTE: Do not load paper while the device is printing.
Chapter 3
(continued)
18 Use the device