HP Officejet Pro K8600 Printer - Manual (Page 40)

1. Printer Information: Shows device information (such as the product name, model
number, serial number, and firmware version number), the accessories that are
installed (such as the duplex unit), and the number of pages printed from the trays
and accessories.
2. Ink Cartridge Status: Shows the estimated ink levels (represented in graphical
form as gauges) and the part numbers and expiration dates of the ink cartridges.
NOTE: The ink levels shown are an estimate only. Actual ink volumes may
vary.
3. Printhead Status: Shows the status of the printhead health and the part numbers,
first-installation dates, and end-of-warranty dates of the printheads, as well as the
accumulated ink usage. The status options for the printhead are: good, fair, and
replace. If the status is 'fair', then the print quality must be monitored, but the
printhead does not need to replaced. If the status is 'replace', then the printhead
should be replaced, as the device will not function until it is.
To print the self-test diagnostic page
•
Toolbox (Windows): Click the Services tab, and then click Print Self-Test
Diagnostic Page.
• HP Printer Utility (Mac OS): Click Device Information from the Information and
Support panel, and then click Print Configuration Page.
• Embedded Web server: Click Settings tab, click Reports in the left pane, select
Self-Test Report from the drop-down list, and then click the Apply button.
Understand the network configuration page
The network configuration page shows the network settings for the device.
Chapter 4
36 Configure and manage