Running hardware diagnostics, 36 running hardware diagnostics – Alcatel Carrier Internetworking Solutions Omni Switch/Router User Manual

Page 1039

Advertising
background image

Page 36-1

36

Running Hardware

Diagnostics

Hardware diagnostics provide you with software tools for diagnosing hardware-related
problems on Omni Switch/Router switching modules. These diagnostics allow you to test
switching modules off-line during network down time.

The Omni Switch/Router have a variety of switching modules interconnected by a frame
backplane and a management backplane. When a hardware failure occurs, the problem may
be related to a number of different failures. As part of a systematic troubleshooting proce-
dure, you can use the built-in diagnostic software to test basic connectivity and functionality.

The diagnostic software includes two basic types of tests: static tests and port tests. Static tests
verify the basic functions of memory and control/status registers of submodules. Port tests
check for data packet processing functions.

You can run the tests individually or sequentially. Diagnostic software also provides an option
that allows you to run all the tests in one session (exception: WSX modules require power
recycle after static test). The diagnostic tests performed vary, depending on the switching
module type under test.

♦ Important Note ♦

For Release 4.4 and later, the Omni Switch/Router is
factory-configured to boot up in CLI (Command Line
Interface) mode, rather than in UI (User Interface)
mode. Because Hardware Diagnostics are supported
only in UI mode, you must change from CLI mode to
UI mode to run Hardware Diagnostics. See Chapter 4,
“The User Interface” for information on changing from
CLI mode to UI mode.

The following tests are available for the Omni Switch/Router:

•

alpreg

Alpine

ASIC

Register Test

•

csr

Command Status Register Test

•

gigareg

Giga-Chip

ASIC

Register Test

•

hrexmem

HRE-X

Memory Test

•

hrexport

HRE-X

Port Test (

MPX

only)

•

ifled

Submodule

LED

Test

•

ilb

Internal Loopback Test (replaces

mloopphy

in Release 3.4 and later)

•

ilbstress

Internal Loopback Stress Test

•

mamcam

Mammoth

CAM

Test

•

mammem

Mammoth

ASIC

Register and Memory Test

•

mloopmac

Mammoth MAC Loopback Test

•

morreg

Moriah Register Test

Advertising