Alcatel Carrier Internetworking Solutions Omni Switch/Router - Manual (Page 189)

Listing Switch Files
Page 7-3
Listing Switch Files
You can use the ls command to list the files in the primary MPX ’s flash memory. To use this
command, enter
ls
at the system prompt. A screen similar to the following will be displayed.
mpx.cmd 18 05/30/98 13:04
mpm.log 18072 06/15/98 17:57
mpx.img 1573617 06/18/98 12:16
esx.img 24289 06/18/98 12:18
mpm.cfg 1024 01/01/70 00:00
mpm.cnf 32768 06/18/98 12:27
1858057 bytes free.
The ls command lists all the files in the current working directory of the primary MPX’ s flash
memory, followed by its size (in bytes), creation date, and creation time. The three-letter file
extension indicates the type of file. Examples include configuration (
cnf and cfg ), command
( cmd ), image ( img ), Programmable Gate Array ( .pga ), etc. The ls command also lists the total
number of bytes of free memory in flash memory.
♦ Note ♦
If you are connected to the primary MPX and you want
to display the files in a secondary MPX , use the sls
command, which is further detailed in Chapter 6,
“Configuring Management Processor Modules.”