Alcatel Carrier Internetworking Solutions Omni Switch/Router - Manual (Page 1071)

Configuring a Switch with an MPX
Page A-9
14. To accept the default ( oxb ) and perform a normal boot, press the <Enter> key. To restore
the factory-configured boot process, enter 0x1000 . The following flags should only be
used for internal debugging or Customer Service diagnosis:
• 0x02 Load the local system symbols.
• 0x04 Do not autoboot.
• 0x08 Quick autoboot (no countdown).
• 0x20 Disable login security.
• 0x40 Use bootp to get the boot parameters.
• 0x80 Use tftp to get the boot image.
• 0x100 Use proxy arp.
A screen prompt similar to the following displays.
Other : dvip:no-name,192.168.10.1,255.255.255.0,192.168.10.255;
15. You can enter the default VLAN IP parameters by entering them in the following format:
dvip:<host name>,<IP address>[,<IP mask>[,<IP broadcast address>]]
16. The following screen prompt displays.
[Boot]:
Enter an uppercase S to save any parameters you changed. The following screen prompt
displays.
[Boot]:
17. Enter an @ to boot your switch.