HP Virtual Connect FlexFabric 10Gb24-port Module for c-Class BladeSystem - Manual (Page 103)

Command line 103
Supported actions: help, set, show
Item Description
set session Modify the session timeout value.
Syntax
set session Timeout=<Number of Minutes>
Property
Timeout (required) Number of minutes from 10 to 1440 to expire idle sessions. Use "0" to disable
session timeout (user sessions never expire). The default value is 15 minutes. If the
Session Timeout value is lowered, currently inactive sessions can be removed.
Examples
->set session Timeout=20
Sets idle user sessions to expire after 20 minutes of inactivity
->set session Timeout=0
Disables session timeout (user sessions never expire)
Item Description
show session Display the session properties
Syntax
show session timeout
Option
Timeout (required) Displays the session timeout value
Example
->show session timeout
Displays the current session timeout value
snmp-access
Manage SNMP access.
Supported actions: add, help, remove, show
Item Description
add snmp-access Add new ranges of IP addresses that will be permitted to access VC Ethernet
modules through the SNMP interface.
Syntax
add snmp-access Network=<IP Address/Netmask Bits>
Parameter
Network (required) The network IP address in the format IP Address/Netmask Bits. The IP
address must be unique and the starting address of an IP subnet range.
Example
->add snmp-access Network=192.168.0.0/24
->add snmp-access Network=2001::1/64
Adds a new range(s) of IP addresses
Item Description
remove snmp-access Remove already configured range(s) of IP addresses that were permitted to
access VC Ethernet modules through the SNMP interface.
Syntax
remove snmp-access Network=<IP Address> | *
Parameter
Network (required) The network IP address of a configured SNMP access
Examples