HP Virtual Connect FlexFabric 10Gb24-port Module for c-Class BladeSystem - Manual (Page 63)

Command line 63
mac-cache
Manage Ethernet MAC cache failover settings.
Supported actions: help, set, show
Item Description
set mac-cache Modify Ethernet MAC cache failover settings.
Syntax
set mac-cache [Enabled=<true|false>] [Refresh=<interval>]
Properties
Enabled
(optional)
Enables or disables MAC cache failover. Valid values include "true" and "false".
Refresh
(optional)
The refresh interval for the MAC Cache (in seconds). Valid values include integers from
1 to 30. The default refresh interval is 5 seconds.
Examples
->set mac-cache Enabled=true
Enables MAC cache failover
->set mac-cache Enabled=true Refresh=10
Enables MAC cache failover and sets the refresh interval
Item Description
show mac-cache Display Ethernet MAC cache failover settings.
Syntax
show mac-cache
Example
->show mac-cache
Displays Ethernet MAC cache failover settings
mcast-filter-rule
Manage new Multicast Filter rules for a Multicast filter.
Supported actions: add, help, remove
Item Description
add mcast-filter-rule Create a new Multicast Filter rule for a Multicast filter.
Syntax
add mcast-filter-rule McastFilter=<FilterName>
Networks=<IP Address>/<mask>[,<IP Address>/<mask>]
Properties
McastFilter (required) The name of an existing Multicast Filter to which the Multicast Filter rules
belong
Network (required) Multicast IP Addresses in the form of IP Address/Netmask Bits. The IP
Address must be unique and should be the starting address of an IP
subnet.
Examples
add mcast-filter-rule McastFilter=MyNewfilter
Networks=224.12.0.0/16,224.20.23.4/32,
224.11.11.3/32
Creates a new Multicast Filter rule for a Multicast Filter
Item Description
remove mcast-filter-rule Remove a Multicast Filter rule from a Multicast filter.